Camera Buttons (1 To 4); Hdd Led; Alarm Out Led; Network Led - PACOM 4-Channel User Manual

4-channel digital video recorder

Hide thumbs Also See for 4-Channel:

Table of Contents

User's Manual

NOTE: For simplicity, the button descriptions in this manual refer to the front panel buttons.

Camera Buttons (1 to 4)

Pressing the individual camera buttons will cause the selected camera to display full screen. Buttons 1 to 4 are also

used to enter passwords.

In the PTZ mode, pressing the button 1 zooms in the screen and the button 2 zooms out the screen, and pressing the

button 3 focuses near and button 4 focuses far.

The HDD LED flickers when the DVR is recording or searching video on the hard disk drive.

The Alarm Out LED is lit when alarm output or internal buzzer is activated.

The Network LED is lit when the unit is connected to a network via Ethernet.

Figure 4 — Infrared remote control.

Table of Contents