Camera Configuration - Cisco 9971 Deployment Manual

Camera Configuration

When the Cisco Unified Video Camera is connected, ensure that it appears in the Accessories menu list.
Once discovered, then a few items can be configured (Auto Transmit Video, Brightness, View Area).
Auto Transmit Video determines if the phone is to start streaming video immediately at the beginning of the call or not
assuming the far end device has video capabilities.
Configuring View Area determines if the video sent is to be zoomed in or out.
Brightness can also be configured to accommodate for the current working environment.
The video can be muted by pressing the video mute softkey.
If the call is muted via the mute hard key, then the video is also muted.
The camera also has a shutter that can be closed to prevent unnecessary video streaming.
When on a video call, it can be configured to display your own picture as well in either corner of the display.
Cisco Unified IP Phone 9971 Wireless LAN Deployment Guide 64