Bluetooth Configuration - Cisco 9971 Deployment Manual

Unified ip phone wireless lan deployment guide

Hide thumbs Also See for 9971:

Table of Contents

Bluetooth Configuration

The Cisco Unified IP Phone 9971 supports Bluetooth 2.1 to allow wireless headset communications.

Currently only the headset profile is supported.

To pair a Bluetooth headset to the Cisco Unified IP Phone 9971, follow the instructions below.

1. Navigate to Applications > Preferences

2. Select "Bluetooth" then select the left softkey "On"

(Ensure the system administrator has enabled Bluetooth)

3. Select the "Add Accessory" softkey in Applications > Preferences when Bluetooth is selected or "Add Bluetooth

Accessory" in Applications > Accessories

(ensure the Bluetooth headset is in pairing mode)

4. Select "Connect" after the Bluetooth headset is discovered

5. Enter the Bluetooth passkey if prompted (will attempt to use 0000)

Cisco Unified IP Phone 9971 Wireless LAN Deployment Guide

Table of Contents