2 - 20 MC55A0/MC55N0 Enterprise Digital Assistant User Guide
Performing a Warm Boot
Hold down the red Power button for approximately five seconds. As soon as the MC55 starts to boot (splash
screen displays) release the Power button.
Performing a Cold Boot
To perform a cold boot:
•
On a numeric keypad, simultaneously press the red Power button and the
•
On an alphanumeric keypad, simultaneously press the red Power button and the
•
On an PIM keypad, simultaneously press the red Power button and the
Waking the MC55
The wake-up conditions define what actions wake up the mobile computer after it has gone into suspend
mode. The mobile computer can go into suspend mode by either pressing the Power button or automatically by
Control Panel time-out settings. These settings are configurable and the factory default settings are shown in
Table 2-8
are subject to change/update.
Wake-up Default Settings
Table 2-8
Condition for Wake-up
AC power is applied.
Mobile computer is inserted into a cradle.
Mobile computer is removed from a cradle.
Mobile computer is connected to a USB device.
A key is pressed.
The scan triggered is pressed.
The screen is touched.
Bluetooth communication
IST activity
USB Host connected
Power Button
No
No
No
Yes
No
No
No
Yes
No
No
and
keys.
and
keys.
and
keys.
Automatic Time-out
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
No