Installing The Battery - Motorola MC55A0 User Manual

Insert microSD Card in Holder
Figure 1-6
Close the card holder door.
5.
Slide to the left to lock into place.
6.
Close rubber access door.
7.

Installing the Battery

NOTE The MC55 ships with either a 2400 mAh or 3600 mAh battery. The 2400 mAh battery is shown in this
installation procedure.
To install the battery.
Insert the battery, bottom first, into the battery compartment in the back of the MC55.
1.
Press the battery down into the battery compartment until the battery release latch snaps into place.
2.
Inserting the Battery
Figure 1-7
The MC55 powers up automatically after inserting the battery if the battery has been charged previously.
microSD card
Holding tab
Battery Release Latch
2
1
Getting Started
Battery
1 - 5