Motorola MC55A0 Quick Start Manual

MC55A0
Note: Remove protective shipping film that covers the touch screen, exit window and camera window
before using.
MC55N0
QUICK START GUIDE
1
2
3
4 (Note 1)
1 Scan/Action Button
2 Up/Down Button
3 Microphone
4 Power Button
5 I/O Connector
6 Keypad
Note 1: To reset the MC55, press and hold the Power button for five (5) seconds.
12
13
9
14
10
11
15
8
16
22
7
21
20
6
17
19
18
12 Handstrap 18 Tether
13 Battery 19 Scan/Action Button
20 Action Button
14 Battery Latch
5
21 Stylus
15 Camera Flash (optional)
22 Speaker
16 Camera (optional)
17 Exit Window
(see Data Capture Options)
7 Scan/Action Button
Notifications
8 Touch Screen
(with screen protector)
Scan/Decode LED:
9 Scan/Decode LED
10 Charging/Battery
Red: Scanning active
Status LED
Green: Good Decode
11 Not Used
Charging/Battery Status LED: Scan/Decode
Charging/Battery Status
Slow blinking amber: Battery charging
Solid amber: Fully charged
Fast blinking amber: Charging error
BATTERY INSTALLATION
3 3 3 3 Insert the Battery
2
2
2 4 3 3 2
4
1. Insert the battery, bottom first, into the battery compartment.
5 1 5
1
4
2. Press down on the battery until the battery latch snaps into place.
3. Replace the handstrap.
8 6
9
10 9
10
7
8 6
7
Numeric Keypad Alpha-Numeric Keypad
Blue Key
Blue Key
Use this key to access function keys shown on the keypad
Use this key to access function keys shown on the keypad
in blue.
in blue.
> Press the Blue key once to activate this state temporarily,
> Press the Blue key once to activate this state, followed
followed by another key.
by another key. >
Press the Blue key twice to lock this state.
>
Press the Blue key a third time to unlock.
Orange Key
Orange Key
Use this key to access the secondary layer of characters.
Use this key to access the secondary layer of characters
> Press the Orange key once to lock the keypad into Alpha
and actions.
state.
> Press the Orange key once to activate this state
> Press the Orange key a second time to return to the
temporarily, followed by another key.
normal state. Remove the Battery
> Press the Orange key twice to lock this state.
> Press the Orange key a third time to unlock.
1. Press the Power button.
2. Remove handstrap.
3. Slide battery latch to the right.
The battery ejects slightly.
3
4. Grasp the battery and lift from
4 3
9
1 the MC55.
5 1 Talk
2 Navigation
3 Soft Key
2 4 Scan/Action Button
10
5 End
6 Orange Key
7 Backlight
2
8 Blue Key
2 2
9 OK
10 Start Menu
PIM Keypad
CHARGING
Charge the MC55
Use the Single-slot cradles (USB or
Ethernet/Modem/USB), Four-slot cradles
(Charge Only or Ethernet) or cables to charge
the battery in the MC55.
You can also charge a spare battery using the
Single-slot cradle.
2
Charging/Battery Status LED
1
Slow Blinking Amber = Charging
Solid Amber = Fully charged
Fast Blinking Amber = Charging error
Charge the Battery
1
Use the Four-slot Battery Charger
to charge batteries separately.
Note: The 2400 mAh battery charges in less than four hours and the 3600 mAh battery charges in less
than six hours.
COMMUNICATION
Install Synchronization Software
Download ActiveSync ® or Windows Mobile Device Center from
http://www.microsoft.com and follow the instructions to install the
software onto the host computer.
Communicate with Host
Create a Partnership
Follow the on-screen instructions to establish a connection between the MC55
and the host computer.