6 - 14 MC55A0/MC55N0 Enterprise Digital Assistant User Guide
Trigger Handle (Continued)
Table 6-9
Problem
MC55 battery does not
charge when Trigger Handle
is placed in a cradle.
Cannot print to printer.
MC55 does not wake from
suspend mode when trigger
is pressed.
Cause
Trigger Handle is not properly seated
in the cradle.
Power is not available to the cradle.
Printer cable not connected properly.
The trigger only wakes the MC55 from
the suspend mode if a scanning
application is active.
Solution
Remove the Trigger Handle from the
cradle and reinsert.
Ensure that power connections to the
cradle are connected properly.
Ensure cable is connected properly to
the printer and Trigger Handle.
Press a key on the MC55 to wake from
the suspend mode.