1 - 14 MC55A0/MC55N0 Enterprise Digital Assistant User Guide
Feed Handstrap into Handstrap Slot
Figure 1-14
Slide the pin into the bottom of the handstrap.
2.
Center the pin in the handstrap loop.
3.
NOTE Handstrap and pin should fit securely into the handstrap mounting area. When pulling on handstrap use
enough force to engage pin into place.
Pull the handstrap so that the pin and bottom of the handstrap slide into position in the mounting area.
4.
Pin and Handstrap in Mounting Area
Figure 1-15
Replace the battery.
5.
Replace the stylus tether onto the handstrap.
6.
Slide Handstrap and Tether Over Handstrap Mount
Figure 1-16
Insert the handstrap clip into the slot on the MC55. Ensure that it is securely in place.
7.