1 - 8
MC45 Integrator Guide
Checking Battery Status
To check the charge status of the main battery or backup battery in the MC45, tap Start > Settings > Power
icon to display the Power window.
First-time Network Activation
GSM/UMTS Activation
Network Activation
To activate on a GSM/UMTS network:
If an active SIM card was installed in the MC45, the MC45 performs the activation process.
1.
The Phone Network - GSM/UMTS Setup dialog box displays.
2.
Tap Yes and then OK. For some carriers, the MC45 resets.
3.
If during start-up, no update connection settings message appears, tap Start > Settings > Connections >
4.
Phone Network Setup and tap Update Connection Settings button.
If the network is unsupported, a message appears with links for manually setting the data connection and
5.
MMS settings.
For detailed information for configuring the phone and activating on a different network, refer to
Phone
Setup.
Resetting the MC45
There are three reset functions, warm boot, cold boot and clean boot. A warm boot restarts the MC45 by
closing all running programs. A cold boot also restarts the MC45, and also initializes some drivers. Data saved
in flash memory or a memory card is not lost. A clean boot resets the MC45 to factory defaults.
Perform a warm boot first. If the MC45 still does not respond, perform a cold boot.
Performing a Warm Boot
Hold down the Power button for approximately five seconds. As soon as the menu screen pops up select
Warm Boot.
Performing a Cold Boot
To perform a cold boot:
Simultaneously press the Power button and the 1 and 9 keys.
1.
The MC45 initializes.
2.
Chapter 5,