2 - 14 MC55 User Guide
LED Indications (Continued)
Table 2-6
Fast Blinking Amber
Off
Single Blink Amber (when Power button pressed)
Blinking Amber (when Power button pressed)
Radio Status LED (MC5574 only)
Slow Blinking Green
Off
NOTE For information about scanning/decoding, see
radio status and settings, see
Resetting the MC55
There are two reset functions, warm boot and cold boot. A warm boot restarts the MC55 by closing all running
programs. A cold boot also restarts the MC55, and also initializes some drivers. Data saved in flash memory or a
memory card is not lost.
If the MC55 is not functioning properly, perform a warm boot first. If the MC55 still does not respond, perform a cold
boot.
Performing a Warm Boot
Hold down the red Power button for approximately five seconds. As soon as the MC55 starts to boot (splash
screen displays) release the Power button.
Performing a Cold Boot
To perform a cold boot:
•
On a numeric keypad, simultaneously press the red Power button and the
•
On an alphanumeric keypad, simultaneously press the red Power button and the
•
On an PIM keypad, simultaneously press the red Power button and the
LED State
Chapter 4, Using the
Indication
Charging error.
Not charging.
Battery depleted.
Battery over-temperature condition.
RF (WWAN) activity.
No RF activity.
Data Capture on page
2-35. For information about WWAN
Phone, or refer to the MC55 Integrator Guide.
and
keys.
and
keys.
and
keys.