Table of Contents
Advertisement
The final three keys in the transport section are:
LOCATE
STORE LOCATE
INPUT MON
MUTING TRACKS
Tracks are muted simply by turning the appropriate PLAY track select keys off. When muted, the
cues are shown in grey on the external monitor.
SOLOING A TRACK
There is no dedicated SOLO key on the RE32. This is not an oversight on our part as the same
thing can be achieved using ALL PB and ALL MUTE. To solo a track, press ALL MUTE (SHIFT+ALL
PB) and select the track(s) you wish to solo. To 'un-solo' the track(s), press ALL PB.
Version 1.00
This is used to locate to new positions in the GRID. It is described later
in the LOCATOR section.
This is used to store locate times. It is described later in the LOCATOR
section.
This key causes all tracks which are armed for recording to temporarily
switch to monitor their input source. Usually, the system's auto-monitor
function causes playback audio to be heard while the transport is in
motion and any armed record inputs to be heard while the transport is
stopped or recording. This key temporarily overrides this switching so
that the input audio can be heard at any time.
PLAYBACK
55
Advertisement
Table of Contents
