Table of Contents
Advertisement
SYSTEM SETUP
SETUP - SINGLE MACHINE
The MULTI MACHINE SETUP pages allow the system to be configured quickly and easily for
many applications. However, for more complex configurations, it may be necessary to setup certain
parameters on individual machine. SINGLE MACHINE SETUP allows this individual parameter
settings to be accessed.
When a single machine is selected on the SETUP page, the following options will be shown:
DIGITAL SETTINGS
Pressing DIGI (F1) on the SINGLE MACHINE SETUP page will take you to the following page:
The parameters are:
MACHINE
SAMPLE RATE
NOTE : Recordings made at a sample rate other than the selected sample rate will play back
at the wrong speed. For example, if the sample rate is set to 44.1kHz and you try to play back
a recording made at 48kHz, the recording will play back slow. Therefore, please make sure
that your recordings are made at the correct sampling rate. Recordings made at different
sample rates cannot be used in the same project.
154
This allows you to select which machine in the system you are configuring.
This sets the machine's sample rate. You may select 32kHz, 44.056kHz,
44.1kHz and 48kHz. Other options may be available depending on the
facilities available on the selected machines.
Version 1.00
Advertisement
Table of Contents
