Table of Contents
Advertisement
VGA SETUP
The SETUP key's SHIFT function is VGA which allows you to setup various options related to the
external display. When you press SHIFT+SETUP, the key's LED will flash and you will receive the
following screen display:
The options are split across several pages. The first page shown above offers the following:
CUE INFORMATION
CUE FADES
CUE LEVELS
WAVEFORMS
MAG
Version 1.00
Allows you to select:
CUE NAMES
This will show the names of the current and,
depending on the direction of playback/jogging/etc.,
the next or previous cues will be listed for each track
down the right of the GRID.
DISK IDS
This will show the SCSI ID numbers of the disk drives
the cues are playing from will be shown down the
right of the GRID
DISK LABELS
This will show the disk label given in the FORMAT
page down the right of the GRID.
DISK NAMES
This will show the name given to the disk in the
FORMAT page down the right of the GRID.
These can be switched ON or OFF. Scrolling is slightly smoother with
the fades switched off.
It is possible to show the cue's level with this option. The height of the
blue box surrounding the waveform will vary according to its level
(although this does have the effect of making the waveform display look
off centre). CUE LEVEL may be switched ON or OFF.
You may select whether the cues' envelopes are shown on the GRID
and the options are ON or OFF. You will note that scrolling is slightly
smoother with the waveforms switched OFF.
You may set the vertical magnification of the waveform envelopes. You
may also do the same thing at any time more conveniently by using
SHIFT+SCROLLVIEW.
GETTING STARTED
31
Advertisement
Table of Contents
