Table of Contents
Advertisement
SINGLE-MACHINE EDITING
EDIT PLAY KEYS
The special play keys above the main transport keys are normally used when editing to check the
location of edit points. Typical operation is to jog over an edit point and use PLAY TO or PLAY
FROM to audition them quickly.
Playback response time of these keys is extremely fast allowing rapid auditioning. Once you are
happy that you are at the right point, you can mark an IN, SYNC or OUT time as appropriate. Of
course, you may mark the IN, SYNC or OUT and then use these edit play keys, maybe nudging
the NOW time, auditioning and re-marking the point.
The default PLAY TO time is 1 second but, if you need longer times, you may change this by
pressing SHIFT+PREROLL to go to the PREROLL SETUP page and then PLAY TIMES (F1/F2) to
go to this screen:
Here, you may set the play duration for the PLAY TO and PLAY FROM keys. You may reset the
play durations at any time by pressing RESET (F5/F6).
Once an edit region has been marked or a cue has been selected, you may use the PLAY IN >
OUT key to listen to the edit region:
90
NOW
PLAY TO
NOW
PLAY FROM
IN
PLAY IN>OUT
OUT
Version 1.00
Advertisement
Table of Contents
