Table of Contents
Advertisement
INTRODUCTION
PANEL LAYOUT
The RE32 is an MTR style remote controller with many commonly used functions available on
dedicated keys. If you break down the RE32's panel into its various sections, it really is quite
straightforward to understand and use.
Track Select Keys
Track Mode
Timecode Display
Utilities
Across the top of the panel are the track select keys. The top row of keys are used to turn tracks on
and off for playback. The second row of keys are used to either select tracks for recording or for
editing. When these keys are showing edit tracks, they are illuminated in green whilst record track
selections are shown illuminated in red.
The TRACK MODE keys are used to setup the function of the track select keys.
TRACKS
The GROUP keys allow you to store and recall combinations of track settings.
The LCD displays information concerning the status of the system at any time as well as being
used to provide soft keys, the function of which changes according to the system's status.
The TIMECODE DISPLAY shows the current now time.
The UTILITIES keys give you access to functions such as DISK, SETUP, EDIT, PREROLL etc..
The amber SHIFT key gives access to keys' sub-functions and these are shown in amber text
beneath the keys.
The TRANSPORT keys provide the basic PLAY, STOP, REWIND, FAST FORWARD, etc.. They
also offer special 'edit play' keys used when editing and these include PLAY TO, PLAY FROM etc..
10
1 - 32
33 - 64
65 - 96
97 - 128
Transport Keys
LCD
Jog Wheel
The TRACKS key is used to select which bank of
tracks are currently assigned to the 32 track keys.
The RE32 can control up to 128 tracks in 4 banks.
The currently selected bank is indicated by the
column of LEDs next to the TRACKS key.
Data Entry
MULTITRACK REMOTE CONTROLLER
LOC
STO
INP
Version 1.00
Advertisement
Table of Contents
