Table of Contents
Advertisement
INPUT ROUTING - ASSIGNING INPUTS TO TRACKS
Depending on the specification of the machines in the system, there may be more tracks than
there are inputs so some way of assigning the inputs to tracks is needed. This is achieved from the
ROUTE INPUTS page which is accessed by pressing F5/F6 (ROUTE INPUTS) on the main record
page.
The first screen shown allows you to select the machine for which you would like to configure the
input assignments:
Select the required machine using the DATA ENTRY +/- keys. As you select each machine, the
display will show the track numbers assigned to that machine to avoid any confusion.
Pressing the EXECUTE will take you to the main routing assignment page. This will vary depending
on the type of machine selected.
Version 1.00
INPUT ROUTING
47
Advertisement
Table of Contents
