Table of Contents
Advertisement
COPYING FILES/DISKS
It is possible to copy data from one disk to another. You may copy individual projects and libraries
or copy the whole disk. Pressing COPY (F5) will give you this screen:
The parameters are:
TRACKS
NOTE: Files can only be copied between two disks attached to the same machine.
DISK
TO DISK
COPY TYPE
IMPORTANT NOTE: DUPLICATE WILL FIRST ERASE THE DESTINATION DISK BEFORE
DUPLICATING THE SOURCE DISK TO IT.
FILE TYPE
FILE NAME
Version 1.00
Here you may select the machine that is connected to the disks drive
you wish to copy between. To avoid confusion, the machines are listed
by the tracks they represent. For example, machine 1 will be shown as
"1-16", machine 2 as "17-32" etc..
Here you may select the 'source' disk you are copying from.
Here you may select the 'destination' or 'target' disk you are copying to.
You may select the type of file you wish to copy in this field. You may
select:
SINGLE FILE - this will copy a specific file as shown in the FILE TYPE
and FILE NAME fields.
ALL PROJECTS - This will copy all projects on the source disk to the
destination disk.
ALL LIBRARIES - This will copy all the libraries on the source disk to the
destinations disk.
ALL FILES - This will copy all the files on the source disk to the destination
disk.
DUPLICATE DISK - This will copy everything from the source disk to the
destination disk.
When SINGLE FILE is selected, you may select the type of file you wish
to copy (i.e. PROJECT, LIBRARY or SETTINGS) in this field.
This parameter allows you to select the file you wish to copy.
DISK MANAGEMENT
107
Advertisement
Table of Contents
