Installing The Hard Disk Drive - Cybernet H6 i-One Series User Manual

Installing the Hard Disk Drive

Cybernet i-One H6/H7
1. Install the hard disk with the HDD bracket
and line up the hard disk bracket with
four screw hole accordingly.
Secure the four screws on the Hard DiskDrive.
Connect the SATA cable to the motherboard.
SATA Cable
2. Connect the SATA cable,
Connect the Power cable
3. Connect the other end of the SATA/Power
cable to the Hard Disk Drive as shown.
.
SATA/Power Cable
Page 17
System Assembly