Matrox Mura MPX-4/4 User Manual page 45

Attach the quad-monitor cable
1
Attach the included quad-monitor cable to
your Matrox graphics card. If a dual-
monitor cable is already connected, detach it
from the DVI connector on your graphics
card.
WARNING: To avoid damaging the LFH-60 connector on your dual-monitor cable or on
your graphics card, carefully insert the connector on your quad-monitor cable as straight
as possible into the connector on your graphics card. Specifically, inserting the connectors
into each other at an angle is likely to bend and damage the pins on the connector of the
quad-monitor cable.
Connect your monitors
2
If your monitor uses an HD-15 connector, connect
it directly to your quad-monitor cable.
If your monitor uses a DVI connector and
supports analog input,
adapter (sold separately
DVI connectors support both digital and analog
input. If you're using one of these monitors with
your Matrox product, make sure it's configured
to use analog input. For more information, see
your monitor documentation.
Make sure all connectors are firmly in place and
properly fastened.
Note: Monitors are numbered consecutively based on
which connector each is attached to. Also, each
connector is labeled with a number. Numbering starts
with the primary display – the one that first displays
information when you restart your computer. If other
graphics hardware is enabled in your system, display
numbering may be different.
Your system detects that your P690 graphics card
supports 4 monitors only if a monitor is connected to connector 3 or 4.
you need a HD15-to-DVI
). Some monitors with
LFH-60 to
quad-HD15 cable
(LFH-60)
Monitor
connector
(HD-15)
Matrox Mura MPX Series – User Guide 45
Quad-
monitor
cable
HD15-to-DVI
adapter
Monitor
connector
(DVI)