Matrox Mura MPX-4/4 User Manual page 43

P690 PCIe ×16
Connect your monitors
1
If your monitor has a DVI connector,
connect your monitor cable directly to your
DVI connector on your card.
If your monitor has an HD-15 connector,
use a DVI to HD-15 adapter included with
your product to connect your monitor cable
to your DVI connector on your card.
Your Matrox card is now installed. Restart your system and install your Matrox software
"Installing your software", page
P690 Plus LP PCIe ×16 with a dual monitor cable
Connect your LFH-60 to dual-
1
DVI cable
Attach your LFH-60 to dual-DVI cable to
the connector on the bracket of your Matrox
card. Make sure the connector is properly
fastened.
WARNING:
your graphics card, carefully insert the connector on your dual-monitor cable as straight
as possible into the connector on your graphics card. Specifically, inserting the connectors
into each other at an angle is likely to bend and damage the pins on the connector of the
dual-monitor cable.
46).
To avoid damaging the LFH-60 connector on your dual-monitor cable or on
Monitor
connector
(DVI)
Monitor
connector
(HD-15)
Matrox Mura MPX Series – User Guide 43
DVI to HD-15
adapter
(see
LFH-60 to dual-DVI
cable (LFH-60)