Matrox Mura MPX-4/4 User Manual page 18

Mura MPX-4/0 – Attach your KX20 to
quad-DVI cable to the connector on the
bracket of your Matrox card. Make sure the
connectors are properly fastened.
Connect your monitors
2
If your monitor has a DVI connector,
connect your monitor cable directly to your
KX20 to quad-DVI cable.
If your monitor has an HD-15 connector,
use a DVI to HD-15 adapter included with
your product to connect your monitor cable
to your KX20 to quad-DVI cable.
Note:
consecutively based on which connector
each is attached to, starting with
connector labeled
Your Matrox card is now installed. Restart your system and install your Matrox software
"Installing your software", page
18 Matrox Mura MPX Series – User Guide
Monitors are numbered
.
1
27).
KX20 to quad-DVI
cable (KX20)
Monitor
connector
(DVI)
Monitor
connector
(HD-15)
KX20 to quad-DVI cable
KX20 to
quad-DVI
cable (DVI)
DVI to HD-15
adapter
(see