Matrox Mura MPX-4/4 User Manual page 20

Connect your monitor cable
3
If your monitor cable has a DVI connector,
connect your monitor cable directly to your
KX20 to quad-DVI cable or your KX20 to
dual-DVI cable.
If your monitor cable has an HD-15
connector, use a DVI to HD-15 adapter
included with your product to connect your
monitor cable to your KX20 to quad-DVI
cable or your KX20 to dual-DVI cable.
Using video devices as input sources
This section describes how to connect a video device to the input connector on your Mura MPX-4/4
or MPX-4/2 card.
Connect your KX20 to quad-DVI
1
cable or KX20 to dual-DVI cable
MPX-4/4 – Attach the KX20 to quad-DVI
cable included with your Mura product to
connector
card. Make sure the connectors are properly
fastened.
MPX-4/2 – Attach the KX20 to dual-DVI
cable included with your Mura product to
connector
card. Make sure the connectors are properly
fastened.
20 Matrox Mura MPX Series – User Guide
on the bracket of your Matrox
A
on the bracket of your Matrox
A
Monitor
connector
(DVI)
Monitor connector
(HD-15)
KX20 to quad-DVI
cable (DVI)
DVI to HD-15
adapter
KX20 to quad-DVI
cable
KX20 to dual-DVI
cable