Matrox Mura MPX-4/4 User Manual page 26

Connect your monitors
2
If your monitor has a DVI connector,
connect your monitor cable to the
connectors labeled
dual-DVI cable.
If your monitor has an HD-15 connector,
use a DVI to HD-15 adapter included with
your product to connect your monitor cable
to the connectors labeled
KX20 to dual-DVI cable.
Attach your DIN to BNC adapter
3
Attach your DIN to BNC adapter to the DIN
connector on your Matrox card.
Attach the cable from your video source to
the BNC connector on the DIN to BNC
adapter.
Your Matrox card is now installed. Restart your system and install your Matrox software
"Installing your software", page
26 Matrox Mura MPX Series – User Guide
and of the KX20 to
1 2
and of the
1 2
27).
Monitor
connector
(DVI)
Monitor
connector
(HD-15)
DIN to BNC adapter
KX20 to dual-DVI
cable (DVI)
DVI to HD-15
adapter
(see