Matrox Mura MPX-4/4 User Manual page 24

S-video connector – If your video device has
an S-video connector, you need a BNC to
S-video adapter.
Connect the adapter to the
connectors on your DVI to BNC cable.
Connect your video device to the S-video
connector on your adapter.
Your Matrox card is now installed. Restart your system and install your Matrox software
"Installing your software", page
24 Matrox Mura MPX Series – User Guide
and
Y C
27).
DVI to BNC cable
(Y and C
connectors)
BNC to S-video
adapter
S-video cable
(see