Matrox Mura MPX-4/4 User Manual page 12

Insert your Matrox card
3
Position your Matrox card over the
a
expansion slot you've chosen.
Push the card in firmly and evenly until
b
it's fully seated in the slot.
Secure the bracket of your Matrox card
c
to the frame of your system.
Secure the bracket of your Matrox card
4
To support the weight of your cable and to avoid damaging your Matrox card, you need to
properly secure the bracket of your card to your system.
To secure your bracket, slip the washer
a
provided with your Matrox product
over the connectors, then screw the
washer onto the bracket of your Matrox
card.
Make sure the washer lies flat against the
b
frame of your system.
Your Matrox card is now installed. If you're installing more than one card,
cards", page 11. Before restarting your system, connect your monitors or devices (see the "Connection
setup" section for the card you want to connect). After connecting, restart your system and install your
Matrox software.
12 Matrox Mura MPX Series – User Guide
Washer
see "Installing multiple
Matrox
card