Matrox Mura MPX-4/4 User Manual page 21

Connect your video device
2
Component connector – If your video
device has a component connector, you
need a DVI to Component adapter.
Connect the adapter to the DVI connector
on your KX20 to quad-DVI cable or your
KX20 to dual-DVI cable. Connect your
video device to the component connector
on your adapter.
Composite connector – If your video device
has a composite connector, you need a DVI
to Composite (RCA) adapter.
Connect the adapter to the DVI connector
on your KX20 to quad-DVI cable or your
KX20 to dual-DVI cable. Connect your
video device to the composite connector on
your adapter.
S-video connector – If your video device has
an S-video connector, you need a DVI to
S-video adapter.
Connect the adapter to the DVI connector
on your KX20 to quad-DVI cable or your
KX20 to dual-DVI cable. Connect your
video device to the S-video connector on
your adapter.
Your Matrox card is now installed. Restart your system and install your Matrox software
"Installing your software", page 27).
KX20 to quad-DVI
cable (DVI)
DVI to Component
adapter
Component video
cable
KX20 to quad-DVI
cable (DVI)
DVI to Composite
(RCA) adapter
Composite video
cable (RCA)
KX20 to quad-DVI
cable (DVI)
DVI to S-video
adapter
S-video cable
Matrox Mura MPX Series – User Guide 21
(see