Option Mode - Panasonic AJ-HPX2100E Operating Instructions Manual

OPTION MODE

Items/ Adjustable
Data Saved Range
REC TALLY RED
GREEN
CHAR
– C U F –
ACCESS LED OFF
SLOT SIDE
LCD SIDE
BOTH
– C U F –
P.OFF GPS HOLD
DATA CLEAR
– C U F –
SDI ON
OFF
METADATA
– C U F –
SDI EDH ON
OFF
– C U F –
SAVE SW ON
(AUD OUT) OFF
– C U F –
SAVE SW ON
(LCD) OFF
– C U F –
COMPRESSION NORMAL
MODE DARK
– C U F –
142 Menu : Menu Description Tables
Remarks
Select the method for displaying the
recording status of AJ-HPX2100 when
controlling an external VTR by setting
1394 CONTROL items to BOTH.
Select the 2 the 1394 CONTROL item on
the <1394 SETTING> screen in the
SYSTEM SETTING page.
RED: The red tally lamp lights up.
GREEN:The green tally lamp lights up.
CHAR: The VF displays [REC] in
characters.
Specify whether or not to enable the P2
card access LEDs.
OFF: Disables both LEDs above the
slots and on the side panel.
SLOT SIDE:
Enables the LED above the slots
and disables the LED on the side
panel.
LCD SIDE:
Enables the LED on the side panel
and disables the LED above the
slots.
BOTH: Enables both LEDs above the
slots and on the side panel.
Select whether or not to hold the UMID
GPS position information while the
power is turned off, thereby keeping this
information as status data holding the
previous value until the power is turned
on again, which enables a new
measurement to start.
HOLD: Hold and save the data.
CLEAR : Clear the data when the power
is turned off, and save zero (No-
Info) from the next power-on
until a new measurement is
completed.
Used to specify whether or not to output
metadata (UMID) to SDI when the
VIDEO OUT menu option is set to HD
SDI or SD HDI.
Select whether or not to add an error
detection flag to the SD SDI output.
Select whether or not to forcibly disable
the audio output when the SAVE ON/
OFF switch is set to [ON].
ON: Disable audio output.
OFF: Enable audio output.
Select whether or not to automatically
turn off the LCD monitor when the SAVE
ON/OFF switch is set to [ON].
ON: Turn off LCD monitor.
OFF: Do not turn off LCD monitor.
Select a compression mode for the
720P mode (for 720-59.94P or 720-50P
only).
NORMAL:
The normal shooting mode is
selected.
DARK: Compressed video distortion that
occurs in dark areas is lowered,
which may increase distortion in
other areas.
Items/ Adjustable
Data Saved Range
Select the method for detecting REC
AUTO REC OFF
TYPE1 START/STOP marks from the frame rate
information in the user bits added
TYPE2
through HD SD IN in HD mode in order
to automatically start or stop recording
(for the AJ-YA350G, an SDI-IN option).
OFF:
TYPE1: REC START/STOP marks are
TYPE2: REC START/STOP marks are
Note
Set the menu option REC SIGNAL to
SDI to input HD SDI signals to the SDI
IN connector. For information about user
bits frame rate information, see [Setting
– C U F – of the user bits] (page 49).
The ____ in the Adjustable Range column indicates the
preset mode.
Remarks
No automatic recording is
performed.
detected from LTC input
through HD SDI for automatic
recording.
detected from VITC input
through HD SDI for automatic
recording.