System Setting; System Mode; Option Mode 1 - Panasonic AJ-SPX900E Operating Instructions Manual

8-2 SYSTEM SETTING

8-2-1 SYSTEM MODE

Items/ Adjustable
Data Saved Range
REC SIGNAL CAM
VIDEO
1394
– C U F E
CAMERA 50i
MODE 25P
S C U F E
V.RES (25P) INTRLCE
PROG.
S C U F E
ASPECT 16:9
4:3
– C U F E
REC MODE 50M
25M
DV
– C U F E
REC TALLY RED
GREEN
CHAR
– C U F E
ACCESS LED ON
OFF
– C U F E
Downloaded From CamcorderManual.com Panasonic Manuals
100
Remarks
Select video input signals.
CAM Record the signal from the camera
VIDEO: Record the signal from the
GENLOCK IN terminal
1394: Record the signal from the 1394
input terminal (when optional AJ-
YAD800G is attached.)
<Notes>
After the power has been turned OFF, this
setting defaults to CAM when the power is
turned ON again.
With VIDEO selected, to synchronise this
camera-recorder to the video signal (VBS)
that is input to the GENLOCK IN terminal,
the GENLOCK item in [8-2-7 GENLOCK]
must be set to EXT.
Switch the operating mode of the camera.
50i: Camera operates in 50i mode.
25P: Camera operates in 25P mode.
Set the vertical resolution when the 25P
mode is selected.
INTRLCE: Lines are mixed. Natural images
can be obtained.
PROG. : Lines are not mixed. Complete
progressive images can be
obtained when images are edited
after shooting.
<Note>
When PROG. is selected, images are
recorded as progressive segmented frame
images, which enables complete
progressive editing. However, adding
Vertical Detail (V.DTL) produces unnatural
images. Therefore, we recommend using
the camera with V.DTL set to 0. (Sufficient
vertical response is maintained in the
images after the progressive editing even
when V.DTL is set to 0.)
Select the aspect ratio for recording.
16:9: Record in <16:9> aspect ratio.
4:3: Record in <4:3> aspect ratio.
Select the recording mode.
50M: Record in DVCPRO50 format.
25M: Record in DVCPRO format.
DV: Record in DV format.
Selects display of the recording status of the
camera when the AJ-SPX900E is used with
a 26-pin extender or Triax, or when it is
controlling an external VTR, by setting the
menu option 26PIN CONTROL to "BOTH".
The menu option 26PIN CONTROL is found
in the OPTION MODE 2 screen on the
SYSTEM SETTING page.
RED: The red tally lamp lights up.
GREEN:The green tally lamp lights up.
CHAR: The VF displays [REC] in characters.
Select whether or not to enable illumination
of the P2 card access LEDs.
ON: Enable the P2 card access LEDs to
light up for card status indications.
OFF: LEDs remain off.
Items/ Adjustable
Data Saved Range
USB ON Select the USB drive mode when using the
OFF P2 card as bulk storage by connecting the
AJ-SPX900E with a PC via USB2.0.
ON: Switches to the USB drive mode.
OFF: Stops the USB drive mode, and
<Note>
After the power is turned off, this setting
defaults to "OFF" when the power is next
turned on.
– – U F –

8-2-2 OPTION MODE 1

Items/ Adjustable
Data Saved Range
P.OFF GPS HOLD Select whether or not to hold the UMID GPS
position information while the power is
DATA CLEAR
turned off, thereby keeping this information
as status data holding the previous value
until the power is turned on again, which
enables a new measurement to start.
HOLD: Hold and save the data.
CLEAR Clear the data when the power is
– C U F –
SDI METADATA ON Select whether or not to output metadata
(UMID) to the SDI (when the optional AJ-
OFF
YA902AG is attached).
– C U F –
SDI EDH ON Select whether or not to add an error
detection flag to the SDI output (when the
OFF
optional AJ-YA902AG is attached).
– C U F –
SAVE SW (AUD ON Select whether or not to forcibly disable the
audio output when the SAVE ON/OFF
OUT) OFF
switch is set to [ON].
ON:
OFF: Enable audio output.
– C U F –
SAVE SW (LCD) ON Select whether or not to automatically turn
off the LCD monitor when the SAVE ON/
OFF
OFF switch is set to [ON].
ON:
OFF: Do not turn off LCD monitor.
– C U F –
SAVE SW (SDI) ON Select whether or not to automatically
disable the SDI output when the SAVE ON/
OFF
OFF switch is set to [ON].
ON:
OFF: Enable SDI output.
– C U F –
<Note>
Menu options for setting 1394 are displayed when an IEEE1394
interface board (AJ-YAD800G, optional) is attached. For more
information, see the AJ-YAD800G instruction manual.
The ____ in the Adjustable Range column indicates the preset
mode.
Remarks
Recording, playback or thumbnail
operation via the AJ-SPX900E is not
permitted.
returns to normal operation.
Remarks
turned off, and save zero (No-Info)
from the next power-on until a new
measurement is completed.
Disable audio output.
Turn off LCD monitor.
Disable SDI output.