Properties - Panasonic AJ-HPX2100E Operating Instructions Manual

The clip's properties and the P2 card's status are displayed.
Clip Property
From the thumbnail menu, select PROPERTY > CLIP
PROPERTY. The following screen appears.
1
2
4
1.
Clip Number
2.
Thumbnail
3.
Clip Information
Indicates the indicators added to the clip and the
number of text and voice memos added to the clip.
The mark appears if the clip is recorded on a write-
protected P2 card.
Note
AJ-HPX2100 is not capable of recording or playing
back voice memos.
P2 Card Status Display
P2 Card Status Display Settings
Select PROPERTY > CARD STATUS from the thumbnail
menu to set the desired indication mode (remaining free
space or used memory capacity) for the P2 card status
display.
1
Press the THUMBNAIL button.
The thumbnail screen appears on the LCD monitor.
2
Press the MENU button and select PROPERTY
PROPERTY SETUP
thumbnail menu.
The following screen appears. Select the P2 card
status display settings from the P2 CARD CAP menu
option.

Properties

3
P2 CARD CAP from the
4.
Clip Information
Displays detailed information about the clip.
CLIP NAME:
Display clip names.
START TC:
The time code value at the start of the
recording.
START UB:
The user bit value at the start of the
recording.
DATE: The date of the recording.
TIME :
The time at the start of the recording.
DURATION:
The time length of the clip.
V-FORMAT:
The recording format for the clip.
FRAME RATE:
The frame rate for the playback.
REC RATE:
The recording frame rate is displayed. (This
is indicated on the clip that data is recorded
in a special way using the camera recorder.)
5.
Clip Meta Data
Displays more detailed data about the clip. Use the
cursor buttons to move the pointer, and press the SET
button to check the detailed content. The underlined
items are automatically set during shooting. For more
information on displayed metadata, see [Setting of Clip
Meta Data] (page 109).
REMAIN:
Show remaining free space on the P2 card as the P2
card status display. (Factory setting)
USED:
Show used memory capacity on the P2 card as the
P2 card status display.
Manipulating Clips with Thumbnails : Properties
115