Panasonic AJ-HPX2100E Operating Instructions Manual page 171

MAINTENANCE
SYSTEM CHECK
Items/ Adjustable
Data Saved Range
COLOR ON ON/OFF switching for checking proper
operation of the AJ-HPX2100.
CHECK OFF
The RGB level in the area around the
center of the screen is indicated in the
viewfinder to show whether each signal
is successfully communicated from the
optical channel to the digital channel
and processed.
– – – – –
LENS ADJ
Items/ Adjustable
Data Saved Range
The iris is only set to F2.8 when this item
F2.8 ADJ ON
set to ON. (Adjustment to F2.8 will be
OFF
executed on the lens)
– – – – –
The iris is only set to F16 when this item
F16 ADJ ON
set to ON. (Adjustment to F16 will be
OFF
executed on the lens
– – – – –
BLACK SHADING
Items/ Adjustable
Data Saved Range
CORRECT ON ON/OFF switching for digital black
OFF shading compensation.
– C U F E
DETECTION – Execute digital black shading
(DIG) compensation.
– – – – –
WHITE SHADING
Items/ Adjustable
Data Saved Range
ON/OFF switching for white shading
CORRECT ON
compensation.
OFF
– C U F E
R H SAW –255 For executing the white shading
compensation manually.
R H PARA :
+000
The sawteeth-shaped waveform and the
R V SAW
:
parabola waveform of the respective
R V PARA
+255
RGB channels are adjusted in the
G H SAW
horizontal direction and the vertical
G H PARA
direction.
G V SAW
G V PARA
B H SAW
B H PARA
B V SAW
B V PARA
– – – F –
Remarks
Data Saved
RB GAIN
CTRL RESET
Remarks
LENS R GAIN
OFFSET
LENS B GAIN
OFFSET
LENS R
FLARE
LENS G
FLARE
Remarks
LENS B
FLARE
The ____ in the Adjustable Range column indicates the
preset mode.
Remarks
LENS FILE ADJ
Items/ Adjustable
Range
ON ON: The gains of Rch and Bch
adjusted in <RB GAIN
OFF
CONTROL> screen are reset.
Furthermore, the flare levels of
Rch, Gch and Bch that are
adjusted on <RGB BLACK
CONTROL> screen are reset.
OFF: The gains of Rch and Bch
adjusted in <RB GAIN
CONTROL> screen areenabled.
Furthermore, the flare levels of
Rch, Gch and Bch that are
adjusted on <RGB BLACK
CONTROL> screen are enabled.
– – – F –
–200 For compensating Rch sensitivity of the
: lens used.
+000
:
+200
– – – F –
–200 For compensating Bch sensitivity of the
lens used.
:
+000
:
– – – F – +200
For adjusting the flare level of Rch.
000
:
100
– – – F –
000 For adjusting the flare level of Gch.
:
100
– – – F –
For adjusting the flare level of Bch.
000
:
100
– – – F –
Data adjusted on the LENS FILE ADJ screen can be
stored on an SD memory card as a lens file.
Menu : Menu Description Tables
Remarks
171