Providing An Id To The Camera - Panasonic AJ-HPX2100E Operating Instructions Manual

Providing an ID to the Camera

The camera ID is specified through the <CAMERA ID>
screen.
The ID can include up to 10 alphanumeric characters,
symbols, and/or spaces.
Note
When the settings menu is displayed, outputting color bar
signals does not indicate the camera ID.
1
Go to the <CAMERA ID> screen from the CAM
OPERATION page.
# < CAMERA ID >
ID1 : ABCDEFGHIJ
ID2 : ABCDEFGHIJ
ID3 : ABCDEFGHIJ
2
Turn the JOG dial button to move the cursor to options
[ID1:] - [ID3:].
3
Press the JOG dial button. The cursor moves to the
ID entry area, allowing you to enter an ID.
4
Turn the JOG dial button until a desired character
appears. The characters that appear are switched in
the following order:
Space:
Alphabetical characters: A to Z
Numerals:
Symbols:
5
Press the JOG dial button to accept a desired
character.
6
Turn the JOG dial button to move cursor to the next
digit (clockwise), and repeat Steps
characters.
To change an input character, turn the JOG dial
button to move the arrow (cursor) to the appropriate
character and carry out steps
7
When all the characters are set, turn the JOG dial
button to move the cursor to [:].
8
Pressing the JOG dial button brings the cursor back
to the options [ID1:] - [ID3:].
58
Adjustments and Settings for Recording : Setting Time Data
0 to 9
', >, <, /, -
4 5
- to set
4 5
and .
9
To exit the menu, press the MENU button.
The settings menu disappears and the status of the
unit is indicated at the top and bottom of the
viewfinder screen.
Notes
When the menu option CAMERA ID is set to "BAR",
the camera ID is recorded together with color bar
signals.
This menu option is accessible from the <VF
INDICATOR1> screen, which is accessible from the
VF page.
The ID POSITION menu option can be used to
select a position where the camera ID is
superimposed on the color bar. The ID POSITION
option can be accessed through the VF
INDICATOR 1 screen on the VF page.
When the TIME/DATE menu option is set to ON, the
camera ID along with the data and time information
are superimposed on the color bar. The TIME/DATE
option can be accessed through the VF
INDICATOR 1 screen on the VF page.