Use Of The External Dc Power Supply - Panasonic AJ-HPX2100E Operating Instructions Manual

Use of the external DC power supply

1
Connect the external DC power supply to the DC IN
socket on the unit.
External DC
power supply
2
Turn "ON" the power switch of the external DC power
supply. (If the power switch is available on the external
DC power supply)
3
Turn ON the POWER switch on the unit.
Rush current may occur at the time for turning on the
power of the unit. We recommend using an external
DC power supply capable to secure double or more
capacity of the total power consumption of the
devices connected to the unit such as the viewfinder
and lights. Use a DC cable with a capacity of 10A or
more.
Confirm the pin arrangements of the DC output
connector of the external DC power supply and the DC IN
socket on the unit, and connect the proper polarities to
each other.
If the +12 V power supply is connected to the GND
connector in error, it may cause a fire or failure of
the unit.
4
1
2
3
DC IN Socket
Notes
If both the battery pack and the external DC power
supply are connected, the electric power is supplied
from the external DC power supply. While the
external DC power supply is used, the battery can
be mounted and removed on/from the unit.
When the external DC power supply is used, ensure
that the power switch of the external DC power supply
is turned on first and then the POWER switch on the
unit is turned on. In the case of the reverse operation,
a malfunction may occur on the unit since the output
voltage of the external DC power supply is raised
slowly.
DC IN Socket
Pin No. Signal
1 GND
—
2, 3
4 +12V
Preparation Power Supply
91