Panasonic AJ-HPX2100E Operating Instructions Manual page 168

Items/ Adjustable
Data Saved Range
FIRST REC PRESET
TC REGEN
– C U F –
P.OFF LCD ON
DISPLAY OFF
– C U F –
TC OUT
TCG
TCG/TCR
– C U F –
TC DISP SEL 30F
24F
– C U F –
TC VIDEO 0
SYNCRO 1
2
3
– C U F –
168 Menu : Menu Description Tables
Remarks
For the first recording after the power is
turned on, a P2 card is inserted and
then switching from this P2 card to
another recording-target P2 card is
performed, select whether or not to
regenerate the time code as the value
on the new P2 card.
PRESET:
Use the camera-recorder's internal
time code.
REGEN: For clips recorded
recording-target P2
regenerate the time code as the
time code of the clip that has the
most recent date and time.
Notes
Set the date and time accurately. For
guidance on setting, see [Setting the
Internal Clock's Date and Time] (page
52).
During operation in either 24P or
24PA mode, regeneration of the value
of the card recorded in drop-frame is
not permitted.
Select whether or not to display the time
code setting and counter indication on
the LCD monitor when the power is
turned OFF.
ON: Display setting and indication while
the power is turned OFF.
OFF: Power-down LCD monitor while
camera power is turned OFF.
Setting and indication disabled.
Select the time code to be output to the
time code output connector.
TCG:Always output time code generator
value.
TCG/TCR:
Display time code generator value
in recording mode, and time code
reader value in playback mode.
Select the display format for the time
code frame digits. (For 1080-59.94i,
720-59.94P or 480-59.94i only
30F: Display time code frame digits in 30
frames.
24F: Convert time code frame digits into
24 frames for display.
For setting to correct the time code
according to the delay of video signals.
0: Do not correct.
1: To delay the time code to be input
according to the timing of the video
images.
2: To forward the time code to be output
according to the timing of the video
images.
3: To delay the time code to be input and
forward the time code to be output,
respectively, according to the timing of
the video images.
For details, refer to [Externally Locking
the Time Code] (page 54).
Items/ Adjustable
Data Saved
REC REVIEW ON
REGEN OFF
on the
– C U F –
card,
UMID SET/INFO
Items/ Adjustable
Data Saved
COUNTRY NO-INFO
– C U F –
ORGANIZATION NO-INFO
– C U F –
USER NO-INFO
– C U F –
DEVICE
NODE
– – – – –
Note
Please refer to [Setting UMID Information] (page 59) for
the UMID information setting.
The ____ in the Adjustable Range column indicates the
preset mode.
Remarks
Range
For selecting whether the time code is
regenerated to the value on the P2 card
or not, when subsequent recording
starts after setting the RET SW item on
the SW MODE screen to R.REVIEW
and pressing the RET button on the lens
or the USER button on the unit on which
the RET SW function is assigned.
ON: The time code is regenerated to
the value on the tape.
OFF: The time code is not regenerated.
Remarks
Range
Input the user's country. NO-INFO is
displayed until the input completes.
Input the user's organisation or
company name. NO-INFO is displayed
until the input completes.
Input the user name. NO-INFO is
displayed until the input completes.
Indicate the product ID number.