Table of Contents
Advertisement
Care and Maintenance
Service
Regular servicing by a Sartorius
technician will extend the service life of
your balance and ensure its continued
weighing accuracy. Sartorius can offer
you service contracts, with your choice
of regular maintenance intervals ranging
from 1 month to 2 years.
Repairs
Repair work must be performed by
trained service technicians.
Any attempt by untrained persons to
perform repairs may lead to hazards for
the user.
Cleaning
!
Make sure that no dust or liquid enters
the balance housing
!
Do not use any aggressive cleaning
agents (solvents or similar agents)
Unplug the AC adapter from the wall
outlet (mains supply)
If you have an interface cable connected
to the balance port, unplug it from the
port
Carefully remove any sample
residue/spilled powder by using a brush
or a hand-held vacuum cleaner
Clean the balance using a piece of cloth
which has been wet with a mild deter-
gent (soap)
After cleaning, wipe down the balance
with a soft, dry cloth
72
Safety Inspection
If there is any indication that safe
operation of the balance with the AC
adapter is no longer warranted:
Turn off the power and disconnect the
equipment from AC power immediately
> Lock the equipment in a secure place to
ensure that it cannot be used for the
time being
Safe operation of the balance with the
AC adapter is no longer ensured when:
– there is visible damage to the AC adapter
– the AC adapter no longer functions
properly
– The AC adapter has been stored for a
relatively long period under unfavorable
conditions
In this case, notify your nearest Sartorius
Service Center or the International Tech-
nical Support Unit based in Goettingen,
Germany. Maintenance and repair work
may only be performed by service tech-
nicians who are authorized by Sartorius
and who
– have access to the required maintenance
manuals
– have attended the relevant service
training courses
Instructions
for Recycling
To ensure adequate protection for
safe shipment, the pipette calibration
balance has been packaged to the
extent necessary using environmentally
friendly materials. After successful
installation of the balance, you should
return this packaging for recycling.
For information on recycling options,
including recycling of old weighing
equipment and disposal of used
batteries, contact your municipal waste
disposal center or local recycling depot.
Advertisement
Table of Contents
