Table of Contents
Advertisement
PVI 3000/4000/5000/5300
Wiring inverters in parallel
PVI 3000-5300 inverters can be connected in parallel when more power is needed. In the parallel configuration, each
inverter shall connect to its own PV array. It is not recommended to connect one PV array to more than one inverter. This may
cause the inverter to work abnormally. The Figure 2.4.4 below shows the connections between inverters and PV arrays in
parallel configuration.
Fig 2.4.4
3 Commissioning the Inverter and PV System
The inverter is mounted, all connections are made and you are ready to power it up.
NOTE: Make sure all tools; parts, etc. are removed from the vicinity of the inverter before turning on.
WARNING: Make a final check for correctness of all AC and DC wiring to the inverter and in the system.
Parallel configuration of inverter
27
Installation and Operation Manual
Advertisement
Table of Contents
