Manual Export
Back up recorded data on a CD/DVD or connected USB device.
To configure a data backup:
1.
Click MENU on the hover menu, and then click BACKUP.
2.
Connect a USB device or insert a CD/DVD.
3.
Click SCAN to locate the device.
4.
Select your desired CAMERAs and the FROM and TO time for the backup.
5.
Click ESTIMATE to display estimated data size and free space available.
6.
Select EXPORT VIEWER to add the Export Viewer to the backup file.
7.
Click EXPORT.
64
Using this export method, video data is saved in a proprietary format and must be
viewed using the Export Viewer software.
The recorder supports CD-RW, DVD-RW, CD+R, CD-R, DVD+R, and DVD-R.
Refer to the USB Flash Drive Approved List in the Introduction chapter. If you are
using a new USB device to back up your data, you must format it first as FAT32.
Click ESTIMATE before clicking EXPORT. If any backup parameters are changed
(Date, Time, Channels) you must click ESTIMATE again.
Do not shutdown the system during the backup process.