ReportStar
To enable ReportStar on your recorder during the initial configuration:
1.
Click ENABLE REPORTSTAR NOW.
2.
Log in using the admin user account. (default username: admin, password: 1234)
3.
Set the CUSTOM DAY/NIGHT TIME.
4.
Click SEND to send a test report to ReportStar.
5.
To send Alarm Events to ReportStar, set SEND ALARM EVENTS INSTANTLY to ON.
6.
To send active updates to ReportStar every 5 minutes, set HEARTBEAT to ON.
7.
Click SAVE to save your settings.
32769AB
To enable ReportStar at any time after the initial configuration, go to NETWORK >
REPORTSTAR SETUP and then set ENABLE REPORTSTAR to ON.
51