Sending Stored Data - Canon imageRunner Advance 4051 Basic Operation Manual

Sending Stored Data

This section describes the flow of basic Access Stored Files operations. The procedure for sending a file stored in a mail box is used here
as an example.
1
Selecting■Function
Select■[Access■Stored■Files]■from■the■Main■Menu■screen.
Press [Access Stored Files].
• If a log in screen for Department ID Management or SSO-H appears, you must enter the applicable authentication information (ID, password/
PIN). If the Copy Card Reader-F1 is attached, first insert a control card.
• If a login service such as Department ID Management or SSO-H has been set, press
46
2
Select■Storage
Select■[Mail■Box].
Select [Mail Box] from the Storage Selection screen.
Select the desired mail box.
You may need to enter a PIN when specifying the mail box.
(Log In/Out) to log out.