Main Power And Control Panel Power - Canon imageRunner Advance 4051 Basic Operation Manual

Main Power and Control Panel Power

The machine is provided with two power switches, a main power switch and a control panel power switch.
Do not connect or disconnect the power cord with wet hands, as this may result in electrical
shock .
●
How to Turn ON the Main Power
Make sure that the power plug is firmly inserted into the power outlet, and then turn ON the main power of the machine following the
procedure below.
1. Open the main power switch cover.
2. Press the main power switch to the "I" side.
3. Close the main power switch cover.
• If you are using a login service, log in using the procedure for the login
service you are using.
• If you want to turn OFF the main power and then back ON again, wait for
at least 10 seconds after the main power indicator is turned OFF before
turning ON the main power.
●
Shutting Down the Machine
This machine performs a procedure to protect hard disk when the machine is shut down. This enables the machine to be shut down safely, even
if there are any jobs being processed, or a MEAP application is running while the machine is shutting down.
1. Open the main power switch cover.
2. Press the main power switch to the "
3. Close the main power switch cover.
• Do not turn the main power OFF while using the Fax/I-Fax function.
Sending or receiving I-fax or fax documents cannot be done when the
main power is turned OFF.
• The machine may take some time to completely shutdown. Do not
unplug the power cord until the main power indicator of the machine is
OFF.
• If the main power is turned OFF during scanning or printing, a paper jam
may occur.
●
Control Panel Power Switch
If the machine is idle for a certain period of time, the machine will enter the Auto Sleep mode to minimize energy consumption. Press the control
panel power switch to cancel the Sleep mode and resume normal machine operations.
12
" side.
1
3
("I" side)
2
1
3
2
(" " side)