Canon imageRunner Advance 4051 Basic Operation Manual page 35

3
Specify■the■Destination
Press■[Address■Book]■→■select■destination■→■press■[OK].
Press [Address Book].
If you are sending to only one destination, select a destination. If you
are sending to multiple destinations, select the destinations → press
[OK].
For more information on storing the destination
in the address book, see e-Manual > Scan and
Send.
You can specify the destination using the one-
touch buttons or frequently used settings. Also,
if you want to send to a new destination not
yet stored, press [New Destination] → enter the
destination.
4
Start■Sending
After■specifying■the■settings,■press■
Press (Start).
If the following screen appears, press
to scan the next original. After all of the originals
are scanned, press [Start Sending].
When sending is complete, remove your originals.
(Start).
(Start)
35