Routine Cleaning; Platen Glass And Underside Of The Feeder/Platen Cover - Canon imageRunner Advance 4051 Basic Operation Manual

Routine Cleaning

If the original is not copied clearly, clean the following parts of the machine. For high-quality printouts, we recommend
cleaning these parts once or twice a month.
●
■ Platen■glass
●
■ Underside■of■the■Feeder/Platen■Cover
●
■ Feeder's■rollers
• When cleaning the machine, first turn OFF the main power switch, and disconnect the power cord .
Failure to observe these steps may result in a fire or electrical shock .
• Disconnect the power cord from the power outlet regularly, and clean the area around the base of
the power plug's metal pins and the power outlet with a dry cloth to ensure that all dust and grime is
removed . If the power cord is connected for a long period of time in a damp, dusty, or smoky location,
dust can build up around the power plug and become damp . This may cause a short circuit and result in
a fire .
• When cleaning with a cloth, do not dampen it too much, as this may damage the original or break the machine.
• Do not use alcohol, benzene, paint thinner, or other solvents for cleaning. Doing so may result in damage to the plastic
parts.
The feeder is standard-equipped for the imageRUNNER ADVANCE 4051/4045.

Platen Glass and Underside of the Feeder/Platen Cover

If the platen glass or the underside of the feeder/platen cover is dirty, the original may not be scanned clearly, or the size of
the original may be detected incorrectly.
1
1
Clean the platen glass and the underside of the feeder/platen cover with a cloth
dampened with water, and then wipe them clean with a soft, dry cloth .
\
2
1
1.■ Clean■the■platen■glass.
2.■ Clean■the■underside■of■the■
feeder/platen■cover.
93