Table of Contents
Advertisement
Associated Documentation
The optional Pull Tractor is documented separately in the LA310 MultiPrinter
Pull Tractor Guide, which is included with the Pull Tractor kit.
The LA310 MultiPrinter Programmer Reference Manual, part number
EK-PPLV2-DK, consists of the following two volumes:
•
Digital ANSI Printing Protocol Level 2 Programming Reference Manual:
this is generic for the DEC PPL2 protocol.
•
Digital ANSI Printing Protocol Level 2 Programming Supplement: this
documents the specific protocol details for the LA310 MultiPrinter and
other Digital printers that support the DEC PPL2 protocol.
Software Requirements
The LA310 MultiPrinter has many features. The features you can use depend
on the following conditions:
•
The computer system (also known as the host) to which the printer is
connected
•
The operating software used by your computer
•
The software program you are using
Check the documentation for the software you are using to determine which
printer features you can use. Some software programs may allow insertion
of printer control codes and escape sequences. The escape sequences are
listed in Appendix H, Appendix I, and Appendix J. Refer to your software
documentation for information about how to insert escape sequences.
The correct use of the LA310 MultiPrinter requires your application package
to have the Digital LA310 driver. If this driver is not available, choose
between the IBM Proprinter driver or the Epson FX-1050 driver, and select the
corresponding protocol on the LA310 MultiPrinter. For more information, refer
to Section 1.6.
If you need help choosing the correct computer software for your application
needs, contact your local Digital office.
xvii
Advertisement
Table of Contents
