Table of Contents
Advertisement
Appendix B:
Maintenance Requirements
This appendix provides the following information:
•
Service maintenance
•
60K service maintenance
•
Roller replacement
•
Service checkpoints
•
Customer maintenance and checks
•
Tools needed when servicing the printer and any special tools
that may be useful
•
List of lubricants and cleaners
Because the printer uses fuser oil, it should not be shipped or
Note:
moved with the fuser oil and fuser intact.
Service maintenance
Like all printers in its class, the Colorwriter requires cleaning and
preventive maintenance determined by usage. Total Call Concept
(TCC) procedures should include the following steps:
•
Discuss option performance with the customer
•
Test option
•
Inspect printer for broken or worn components
•
Vacuum and clean printer
•
Perform any needed/required preventative or corrective
maintenance actions
•
Clean printer exterior surfaces and ensure the work area is clean
•
Document work performed
•
Test printer before leaving the customer site
There is one planned service maintenance at the fuser replacement
interval of 60K pages.
60K maintenance is not available as a kit. The following items
Note:
must be ordered separately: ozone, air filter, separation corona wire
assembly, transfer drum cleaner unit, and fuser (110v or 220v). 60K
service maintenance assumes letter size pages are printed in full
color.
Also see the Getting Started Guide and User Guide for further
maintenance and operations requirements.
This document was created with FrameMaker 4 0 4
B-1
Advertisement
Table of Contents
Troubleshooting
