Communications Menu - Digital Equipment LA310 Installation And User Manual

Table 4–3 PROTOCOL SELECTION menu
Menu Item Parameter
PORT DEPENDENT, DEC PPL2, IBM PP III, EPSON FX-1050
or Optional Emulation
PORT DEPENDENT
SERIAL PORT DEC PPL2, IBM PP III,
EPSON FX-1050 or Optional Emulation
PARALLEL PORT DEC PPL2, IBM PP III,
EPSON FX-1050 or Optional Emulation
1
This item depends on the Optional Emulation Selection. Factory setting is EPSON FX-1050.
When an optional emulation card is used and is selected, the actual optional emulation name is
printed here.
Table 4–4 COMMUNICATIONS Menu
Menu Item Parameter
PORT SERIAL PORT, PARALLEL PORT, AUTOMATIC
SELECTION
SERIAL COMM
BAUD RATE 150, 300, 600, 1200, 2400, 4800, 9600
DATA FORMAT 7-SPACE, 7-MARK, 7-NONE, 7-EVEN, 7-ODD, 8-NONE, 8-
EVEN, 8-ODD
BUFFER XON/XOFF, DTR
CONTROL
MONITOR DSR NOT SELECTED,
SELECTED (received data ignored from serial line and data not
sent to host when DSR is low)
DISCON/FAULT NOT SELECTED,
DROP DTR
fault is cleared),
PULSE DTR
seconds),
BREAK SIGNAL (break signal sent on any fault ; a break signal
is a space condition transmitted for 0.275 seconds)
2
These features are disabled if BUFFER CONTROL is set to DTR.
Configuring the Printer
4.4 Summary of Set-up Features
1
2
(on any fault, the DTR signal is dropped until the
2
(on any fault, the DTR signal is dropped for 5
Configuring the Printer 4–11
1
1