Table of Contents
Advertisement
Epson FX-1050 Quick Reference
Table J–10 Character Size and Pitch
Command
Description
1
ESC P
Set Horizontal Spacing to 10 CPI
1
ESC M
Set Horizontal Spacing to 12 CPI
ESC p n
Proportional Spacing
1
SI
(0/15) Condensed Printing
1
ESC SI
Condensed Printing
DC2
(1/2) Cancel Condensed Printing
ESC SP n
Pitch modification
SO
(0/14) Double-Width Printing By
Line
ESC SO
Double-Width Printing By Line
DC4
(1/4) Cancel Double-Width Printing By Line
ESC W n
Continuous Double-Width
Printing
ESC w n
Double-Height Printing
1
These commands apply only if Proportional Spacing is canceled.
Table J–11 Emulation Differences Between the LA310 MultiPrinter in EPSON FX-1050
mode and the Epson FX-1050 Machine
LA310 MultiPrinter
437, 850, 210, 220, 857, 860, 862, 863, 865.
J–8 Epson FX-1050 Quick Reference
Notes
n = 0/0 or 3/0 : Cancel Proportional Spacing
n = 0/1 or 3/1 : Select Proportional Spacing
10 cpi condensed to 17.14 cpi
12 cpi condensed to 20 cpi.
Applies only if Double-Height Printing
canceled.
SI
Same as
command.
Increase the selected pitch by n/120 in.
Maximum value for n : 127.
Canceled by the commands CR, LF, FF, VT,
DC4, ESC W 0.
SO
Same as
.
n = 0/0 or 3/0 : Cancel Double-Width
n = 0/1 or 3/1 : Select Double-Width
n = 0/0 or 3/0 : Cancel Double-Height
n = 0/1 or 3/1 : Select Double-Height
Overrides Script, Condensed and High Speed
Draft Printing.
Epson FX-1050
Resident Code Pages
Machines produced starting from 1991 have
437, 850, 860, 863, 865.
(continued on next page)
Advertisement
Table of Contents
