Table of Contents
Advertisement
1.4 Testing the Printer
The printer self-test allows the printer to check its operations independently.
To load paper into the printer and run the self-test, perform the following
steps:
1. Open the front cover, and check that the printhead adjustment lever is in
position 1 (see Figure 1–7).
NOTE: For paper other than single sheet originals, you must adjust the
printhead adjustment lever to a different position. See Section 3.3.
Figure 1–7 Opening the Front Cover and Setting the Printhead Adjustment
Lever
Installing the Printer
1.4 Testing the Printer
Installing the Printer 1–11
Advertisement
Table of Contents
