Ledj STAR15 User Manual

3 x 2m matrix tri led cloth

Advertisement

Quick Links

www.prolight.co.uk
LEDJ Pro 3 x 2M Matrix Tri LED Cloth - STAR16
LEDJ 3 x 2M Matrix Tri LED Cloth - STAR15

USER MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STAR15 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ledj STAR15

  • Page 1: User Manual

    LEDJ Pro 3 x 2M Matrix Tri LED Cloth - STAR16 LEDJ 3 x 2M Matrix Tri LED Cloth - STAR15 USER MANUAL...
  • Page 2 LEDJ MATRIX STARCLOTHS SAFETY WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! CAUTION! Keep this equipment away from rain, moisture and liquids. SAFETY INSTRUCTIONS Every person involved with the installation, operation & maintenance of this...
  • Page 3 LEDJ MATRIX STARCLOTHS SAFETY IMPORTANT: The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment. • Never let the power-cable come into contact with other cables. Handle the power-cable and all mains voltage connections with particular caution! •...
  • Page 4 4, SD card Technical Specifications: DMX channels: 2 DMX, sound active and auto run modes 187 Ultra Bright Tri colour LEDs - STAR15 726 Ultra Bright Tri colour LEDs - STAR16 Hanging tabs on 3 sides Fire retardent material Power consumption: 60W - STAR15...
  • Page 5 LEDJ MATRIX STARCLOTHS Operations Operations: There are three operating modes to choose from; 1, Auto run 2, Sound Active 3, DMX NOTE: Before use, please insert the supplied SD card and follow the instructions below. Auto run mode To set the Matrix cloth in auto run mode, set all dip switches to the off position and use the “SENSITIVITY/SPEED”...
  • Page 6 DATA Cable (DMX cable) requirements (for DMX operation): • The LEDJ Matrix cloths can be controlled via DMX-512 protocol. The DMX address is set on the back of the unit. Your unit and your DMX controller require a standard 3-pin XLR connector for data input/output (figure 1).
  • Page 7 LEDJ MATRIX STARCLOTHS DMX SET UP Notice: • Be sure to follow figures 2 & 3 when making your own cables. Do not connect the cable’s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR’s outer casing.
  • Page 8 LEDJ MATRIX STARCLOTHS DIP SWITCH REFERENCE CHART DMX Dip Switch Quick Reference Chart Dip Switch Position...

This manual is also suitable for:

Star16

Table of Contents