Installation Accessories - 2N EntryCom User And Service Manual

Installation Accessories

3.2.
Part No. 9135331E
Wall mounting roof
for 1 module
Dimensions (WxHxD):
103 x 218 x 60 mm
Part No. 9135332E
Wall mounting roof
for 2 modules
Dimensions (WxHxD):
203 x 218 x 60 mm
All mounting accessories are made from stainless steel particularly necessary for
outdoor applications unless there is suitable weather protection. The flush mounting
frame box (without roof) enables installation of the EntryCom unit indoors so that it
does not protrude from the wall (up to 1 mm).
Part No. 9135351E
Flush mounting box
with 1-module frame
Dimensions:
125 x 235 x 46 mm
Hole:
110 x 220 x 50+- 5 mm
Part No. 9135352E
Flush mounting box
with 2-module frame
Dimensions:
225 x 235 x 46 mm
Hole:
210 x 220 x 50+- 5 mm
7
Part No. 9135361E
Flush mounting box with 1-module roof
Roof dimensions (WxHxD) :
129 x 240 x 41 mm
Hole (WxHxD):
110 x 220 x 50mm +- 5mm
Part No. 9135362E
Flush mounting box with 2-module roof
Roof dimensions (WxHxD) :
229 x 240 x 41 mm
Hole (WxHxD):
210 x 220 x 50mm +- 5mm