Installation - NEC Express5800/R120e-1M EXP291 User Manual

Chapter 2 Preparations

1.18.1 Installation

Install a hard disk drive by using the following procedure.
1. See Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2. Locate the slot where you install the hard disk drive.
The server has 6 slots (or 8 slots when additional HDD cage is installed). Install hard disk drives in
ascending port number order.
3. Remove the dummy trays.
Dummy trays are installed in every slot
except for slot 0.
4. Unlock the handle of the tray.
5. Hold the tray firmly and insert it into the
slot.
Note
In the RAID System, use hard disk drives that have the same specifications
(capacity, rotational speed, and standard) for each Disk Array.
Note
Keep the removed dummy trays for future use.
• Push it all the way until the handle's lock touches the frame.
Note
• Hold the tray firmly with both hands.
Express5800/R120e-1M User's Guide
1. Installing Internal Optional Devices
103