Table of Contents
Advertisement
Chapter 2 Preparations
1.6
Removing Top Cover
You need to remove top cover when installing or removing the following component:
Optical disk drive,
DIMM,
TPM module,
Additional HDD cage,
RAID Controller,
1.
See steps 1 to 5 in Chapter 2 (1.3 Overview of Installation
and Removal) for preparations.
2.
Loosen thumb nut located on rear panel.
3.
Slide Top Cover toward the rear of the server while pressing
Release Button on the cover.
4.
Lift the cover, and remove it from the server.
LAN riser card,
Processor,
Internal Flash Memory,
PCI card,
Battery for RAID Controller
Express5800/R120e-1M User's Guide
1. Installing Internal Optional Devices
53
Advertisement
Table of Contents
